snmprealwalk

(PHP 4, PHP 5, PHP 7, PHP 8)

snmprealwalk返回指定的所有对象,包括它们各自的对象 ID

说明

snmprealwalk ( string $host , string $community , string $object_id , int $timeout = 1000000 , int $retries = 5 ) : array

The snmprealwalk() function is used to traverse over a number of SNMP objects starting from object_id and return not only their values but also their object ids.

参数

host

The hostname of the SNMP agent (server).

community

The read community.

object_id

The SNMP object id which precedes the wanted one.

timeout

The number of microseconds until the first timeout.

retries

The number of times to retry if timeouts occur.

返回值

Returns an associative array of the SNMP object ids and their values on success or false on error. In case of an error, an E_WARNING message is shown.

范例

Example #1 Using snmprealwalk()

<?php
 print_r
(snmprealwalk("localhost""public""IF-MIB::ifName"));
?>

The above will output something like:

     
    Array
      (
      [IF-MIB::ifName.1] => STRING: lo
      [IF-MIB::ifName.2] => STRING: eth0
      [IF-MIB::ifName.3] => STRING: eth2
      [IF-MIB::ifName.4] => STRING: sit0
      [IF-MIB::ifName.5] => STRING: sixxs
    )

参见

  • snmpwalk() - 从代理返回所有的 SNMP 对象

User Contributed Notes

aleksander dot sztramski at kpsi dot pl 20-Aug-2009 04:39
If you wish to use version 2c or 3, use the following functions:

snmp v2c functions:

snmp2_get (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_getnext (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_real_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_set (string host, string community, string object_id, string type, mixed value [, int timeout [, int retries]])

snmp v3 functions:

snmp3_get (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
snmp3_getnext (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string pri)
snmp3_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_p)
snmp3_real_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string p)
snmp3_set (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
Anonymous 21-May-2008 10:19
To check if there were any results found you have to use the empty() function.  The count() function always returns a number 1 or larger.

     $walk_result = snmprealwalk($machine_ip, $community, $snmpcodes['interface_names']);

    if (empty($walk_result)) {
        print "No network interfaces found.<br>\n";
        exit(0);
    }
scot at indievisible dot org 09-Aug-2006 12:10
Some improvements based on testing a lot of OIDs on a lot of devices.

<?php
function snmptable($host, $community, $oid) {
   
// TODO: get original state and restore at bottom
   
snmp_set_oid_numeric_print(TRUE);
   
snmp_set_quick_print(TRUE);
   
snmp_set_enum_print(TRUE);

   
$retval = array();
   
$raw = snmprealwalk($host, $community, $oid);
    if (
count($raw) == 0) return ($retval); // no data
   
   
$prefix_length = 0;
   
$largest = 0;
    foreach (
$raw as $key => $value) {
        if (
$prefix_length == 0) {
           
// don't just use $oid's length since it may be non-numeric
           
$prefix_elements = count(explode('.',$oid));
           
$tmp = '.' . strtok($key, '.');
            while (
$prefix_elements > 1) {
               
$tmp .= '.' . strtok('.');
               
$prefix_elements--;
            }
           
$tmp .= '.';
           
$prefix_length = strlen($tmp);
        }
       
$key = substr($key, $prefix_length);
       
$index = explode('.', $key, 2);
        isset(
$retval[$index[1]]) or $retval[$index[1]] = array();
        if (
$largest < $index[0]) $largest = $index[0];
       
$retval[$index[1]][$index[0]] = $value;
    }

    if (
count($retval) == 0) return ($retval); // no data

    // fill in holes and blanks the agent may "give" you
   
foreach($retval as $k => $x) {
        for (
$i = 1; $i <= $largest; $i++) {
        if (! isset(
$retval[$k][$i])) {
               
$retval[$k][$i] = '';
            }
        }
       
ksort($retval[$k]);
    }
    return(
$retval);
}
 
?>
scot at indievisible dot org 09-Aug-2006 08:16
Since PHP doesn't have a nice snmptable-like function... here is a quick-and-dirty hack that works for me. Works on complete and sparse tables. The example oids are for the route (complete) and interface (often sparse) tables.

<?php
    $a
= snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.4.21") or die("error");
   
print_r($a);
   
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.2.2") or die("error");
   
print_r($a);

function
snmptable($host, $community, $oid) {
   
// TODO: get original state and restore at bottom
   
snmp_set_oid_numeric_print(TRUE);
   
snmp_set_quick_print(TRUE);
   
snmp_set_enum_print(TRUE);

   
$retval = array();
   
$raw = snmprealwalk($host, $community, $oid) or die("snmptable: unable to walk OID $oid");

   
$prefix_length = 0;

    foreach (
$raw as $key => $value) {
        if (
$prefix_length == 0) {
           
// don't just use $oid's length since it may be non-numeric
           
$prefix_elements = count(explode('.',$oid));
           
$tmp = '.' . strtok($key, '.');
            while (
$prefix_elements > 1) {
               
$tmp .= '.' . strtok('.');
               
$prefix_elements--;
            }
           
$tmp .= '.';
           
$prefix_length = strlen($tmp);
        }
       
$key = substr($key, $prefix_length);
       
$index = explode('.', $key, 2);
        isset(
$retval[$index[1]]) or $retval[$index[1]] = array();
        isset(
$firstrow) or $firstrow = $index[1];
       
$retval[$index[1]][$index[0]] = $value;
    }

   
// check for holes in the table and fill them in
   
foreach ($retval[$firstrow] as $key => $tmp) {
        foreach(
$retval as $check => $tmp2) {
            if (! isset(
$retval[$check][$key])) {
               
$retval[$check][$key] = '';
            }
        }
    }

    return(
$retval);
}
?>
railson at amixsi dot com dot br 30-May-2006 10:52
Attention: timeout is in microseconds (multiply by 1,000,000 for seconds)
Stephen Cope 09-Sep-2004 08:38
Here's a way to find the uptime and number of users on a machine. (Note that uptime is the uptime of the snmpd daemon, which should be fairly close to the uptime for the host.)

<?php
        $state
= snmprealwalk($host, "public", ".1.3.6.1.2.1.25.1", 50, 1);
       
$uptime = ereg_replace("^.*\) ([0-9]+ .*):[0-9][0-9]\.[0-9]{2}.*$", "\\1", $state['host.hrSystem.hrSystemUptime.0']);
       
$users  = (int)ereg_replace("Gauge32: ", "", $state['host.hrSystem.hrSystemNumUsers.0']);
       
printf('<div class="machine"><dt>%s</dt><dd>%s</dd>', $host, $desc);
       
printf('<dd>up %s</dd>', $uptime);
        if (
$users ) printf('<dd>%d user%s</dd>', $users, ($users > 1) ? 's' : '');
       
printf('</div>');
?>
Lars Troen 24-Feb-2003 05:30
snmprealwalk indexes the values using the oid instead of an integer. This is useful when you need data that is contained in the oid as well as the value.

Here's an example for retrieving and printing vlan info:
//
// I have collected the vlan identifiers earlier from the 3com mib and they are stored in the $vlan table.
//
  for($n=0;$n<count($vlan);$n++){
    print $vlan[$n][id]."  ".$vlan[$n][name]."<br>\n";
    $ifStackStatusTable=@snmprealwalk($switch, $community, ".1.3.6.1.2.1.31.1.2.1.3.".$vlan[$n][id]); // ifMIB.ifMIBObjects.ifStackTable.ifStackEntry.ifStackStatus
    for(reset($ifStackStatusTable);  $port = key($ifStackStatusTable);  next($ifStackStatusTable)){
      print "$port=$ifStackStatusTable[$port]<br>";
      }